How can I improve speaker quality?

Often the default sound of the speakers is not as good as expected, and users begin to look for various ways to improve it.

Remove all unnecessary

Improvements in the acoustic parameters of the room will positively affect the quality of sound you will hear from your speakers.

From the room you need to remove all resonating objects from materials that degrade the overall sound. These include all things made of metal and glass: ideally, all the furniture in the room with acoustics should be made of wood and located symmetrically concerning the speaker system.

Quality equipment

One of the most effective ways to improve the sound quality of your home system is to equip your audio system with a good quality amplifier. This device can give the musical signal dynamism, spatiality, and provide a detailed, strong, and pleasant sound.

However, besides this, the amplifier must receive a good analog signal from the source, which reasonably leads us to the fact that the DAC is also necessary. And to get true pleasure from listening to music, you need not a weak device, so you need to pay attention to at least the best DACs under $500 or even more expensive.

Very high-quality speaker cables

Connect the power amplifier to the speakers with a very high-quality speaker cable. This is the most vulnerable link in any sound reproduction system. Unlike those cables that transmit a low-level signal, a much higher voltage and the current signal goes through the acoustic cable. When we connect the power amplifier to the speakers through a cable, the resistance of the cable somewhat weakens the damping efficiency of the motion amplifier of the speaker cone, especially the low-frequency one. And as a result, the elasticity and controllability of the bass are reduced. Therefore, the speaker cable must have low resistance, be fast and short enough.

Use vibration isolators

Do not place speakers directly on a furniture shelf, bare floor, or carpet. On a smooth surface, the sound “skips”, and on a too-soft surface it “gets stuck”. In order for the sound to be dynamic, clear, with good resolution, you need to provide it with a reliable foundation.